RAM Single Disc, Organic Clutch & Flywheel Kit, for 93~95 ZR-1 Corvette.  Designed for complete compatibility of components, to eliminate the original pull-release style clutch and dual mass flywheel. This kit, with the 300 series organic, single disc, will handle up to 550 horsepower.

 NOTE: All RAM Clutch kits are fine tuned to the ZR-1 LT5 application, in-house by Jerrys Gaskets, before being shipped to the customer.  This means there are no installation measurements required, no shim pak calculations & no length adjustments to the Hydraulic Release Bearing stud.  Hydraulic line routing with the proper fittings and HRB orientation, is simple.  

This exclusive feature will save the installer not only significant time, it will also eliminate measurement errors.  Our custom instructions with many photos, will make installation much simpler and result in higher consumer confidence.  

Contains the following components;

• PN 10212536      Aluminum Flywheel, 14# 
• PN 10210401      Hi-clamp Pressure Plate with 2800 pounds clamp load, 
• PN 10210309      300 series organic clutch disc,
• PN 10218155      Internal hydraulic release bearing (small bore)
• Accessories         AN braided SS lines & fittings to adapt to OEM master cyl

Kit does not include the following recommended components; 

ARP Flywheel bolts for this flywheel. Click here ---> Bolt Set (8), RAM ARP Flywheel, 89~95 [0B2]

RAM Pressure Plate bolts. Click here ---------------> Bolt Set (6), RAM Pressure Plate, 89~95 [0B2]

Clutch alignment tool -------------------------------> Clutch Disc Alignment Tool, 89~95 [0B2]