RAM Dual Disc Organic Clutch & Flywheel Kit, for 93~95 ZR-1 Corvette.

RAM Force 9.5 dual disc conversion systems for C4 Corvette eliminates the stock, pull style clutch components and dual mass flywheel. The RAM system consists of aluminum flywheel, hi-clamp pressure plate with 2800 pounds clamp load, two 300 series organic clutch discs, an internal hydraulic release bearing and the necessary fittings to adapt to the factory master cylinder.  This system will hold up to 750ft/lbs torque.  Total rotating mass, flywheel, discs, floater  & pressure plate weighs 36 lbs, compared to the OE Dual Mass flywheel & clutch at 59 lbs.  

 NOTE: All RAM Clutch ZR-1 LT5 kits are fine tuned in-house by Jerrys Gaskets, before being shipped to the customer.  This means there are no installation measurements required, no shim pack calculations & no length adjustments to the Hydraulic Release Bearing stud.  Hydraulic line routing with the proper fittings and HRB orientation, is simple.  This Jerrys Gaskets exclusive feature will save the installer not only significant time, it eliminates measurement errors.  Our custom instructions with photos, makes installation simpler and results in higher consumer confidence.  

Includes the following components:

• Aluminum Billet Fylwheel, 15#
• Force 9.5 Dual Organic Disc Clutch System
• Hydraulic Release Bearing Kit

Recommended: ARP Flywheel bolts for this flywheel. Click here ---> Bolt Set (8), RAM ARP Flywheel, 89~95 [0B2]